Skip to content
Science

Performance3 min readBy Juan Manuel Rovira de Miguel

Load-velocity profile: a step-by-step guide

How to build a load-velocity profile to estimate your 1RM without a maximal test and adjust the load of every session, with a barbell or on a machine.

The load-velocity profile is the central tool of velocity-based training. It tells you what percentage of your maximum you are lifting without having to do a one-repetition maximum test, which is tiring, time-consuming and carries some risk.

What it is based on

The closer a load is to your maximum, the more slowly you move it. González-Badillo and Sánchez-Medina showed this in the bench press with 120 trained men: the relationship between mean propulsive velocity and %1RM was almost perfect (R² = 0.98). Velocity at the maximal load was 0.16 ± 0.04 m/s. And most usefully: after six weeks of training, 1RM rose by 9.3%, but the velocity corresponding to each percentage stayed the same.

This means that, if you know the velocity at which you move each percentage in an exercise, today’s velocity tells you how much you are lifting relative to today’s maximum.

Step by step

  1. Choose the exercise and keep it the same. The profile applies to one specific exercise, with the same technique and the same range of motion. On a machine, the same machine and the same seat setting.
  2. Warm up well. A few light sets of the exercise itself.
  3. Do 4 to 6 increasing loads. Start with a light load and increase progressively up to a load you move slowly, without reaching failure.
  4. At each load, 2–3 repetitions at maximal intended velocity. The intent to go as fast as possible is essential: otherwise velocity does not reflect the load.
  5. Record the best repetition at each load. Always the same variable: mean velocity or mean propulsive velocity.
  6. Draw the line. A straight line is fitted to the load-velocity pairs. Extending it to the 1RM velocity gives an estimate of the one-repetition maximum.
  7. Repeat it every 4–6 weeks or whenever fitness changes substantially.

How to use it day to day

  • Adjust the load. If the programme calls for a specific velocity and today you are slower, reduce the weight; if you are faster, increase it.
  • Control fatigue within the set. Combined with velocity loss (for example, stopping at a 20% loss), the profile decides the load and the loss decides when to stop. We explain it in VBT on machines.
  • See your progress. If you move the same weight faster than a month ago, you have improved — no maximal tests needed.

Common mistakes

  • Using another exercise’s or another person’s profile. Published values for the bench press or squat do not apply to a leg press or a lat pulldown.
  • Not moving every repetition at the maximum possible velocity.
  • Changing technique or range of motion between sets.
  • Mixing mean velocity and peak velocity.

On machines too

On plate-loaded machines the profile works the same way, and the guided path makes it more repeatable. The only difference is that each machine needs its own profile. PowerTrack attaches magnetically to the weight stack or to free-weight equipment and records the velocity of every repetition, so building the profile and comparing it between sessions requires no manual note-taking.

Free tool

1RM calculator from velocity (load-velocity profile): Enter 2 to 6 loads with the mean velocity of your best repetition at each. The calculator builds your load-velocity profile and estimates your 1RM and the loads for each percentage.

Frequently asked questions

What is the load-velocity profile?

It is the relationship between load and the velocity at which it is moved in an exercise. It lets you estimate what percentage of your maximum (1RM) you are lifting without a maximal test.

How do you build a load-velocity profile?

After warming up, do 4 to 6 increasing loads without reaching failure, with 2 or 3 repetitions at maximal velocity at each one. A straight line is drawn through the best velocity at each load and extended to the 1RM velocity.

How often should the profile be repeated?

Every 4 to 6 weeks, always with the same exercise, the same technique and the same velocity variable.

Does the same profile work for several machines?

No. Each exercise, each machine and each person needs its own profile.

References

  1. González-Badillo JJ, Sánchez-Medina L. Movement velocity as a measure of loading intensity in resistance training. Int J Sports Med, 2010.
  2. Pareja-Blanco F et al. Effects of velocity loss during resistance training on athletic performance, strength gains and muscle adaptations. Scand J Med Sci Sports, 2017.

Shall we show it at your facility?

We will show you the device in action, with no commitment, on-site or by video call.