Assessment4 min readBy Juan Manuel Rovira de Miguel
Hydraulic or digital dynamometer
Hydraulic (Jamar-type) vs digital hand dynamometers compared: accuracy, the data they provide, maintenance and who each one suits in clinical practice, physiotherapy or research.
Summary
The hydraulic dynamometer is the historical reference in studies and is very robust, but it only gives the peak and has to be read and written down by hand. The digital one records the full force curve and RFD and stores the data, but its agreement with the reference should be checked before applying published cut-off points.
Comparison
| Hydraulic (Jamar type) | Digital (strain gauge) | |
|---|---|---|
| What it measures | Maximal force (peak) | Peak, force curve, time to peak and RFD |
| Reading | Needle, manual | Automatic on screen or app |
| Data recording | By hand | Stored and exportable (Excel, CSV) |
| Comparing hands and sessions | Manual | Automatic |
| Use in studies | Reference for most tables and cut-off points | Growing; agreement must be checked |
| Maintenance | Can lose calibration over time; periodic calibration | Battery; calibration per manufacturer |
| Best for | One-off screening compared with classic tables | Follow-up, rehabilitation, research and reports |
What the evidence says
A 2025 study with 124 people compared the hydraulic Jamar with two electronic and one analogue dynamometer: correlations were very high, but there were systematic differences between devices, with means from 25.7 to 29.6 kg in patients. The practical consequence is to always use the same device to follow a person and to be careful when applying cut-off points obtained with another device.
Which to choose
- Hydraulic if you only need a one-off value to compare with classic tables and will not track progress.
- Digital if you will repeat the measurement, compare hands, document progress or study rate of force development, which declines earlier than maximal strength with age.
See the full criteria in how to choose a dynamometer for your practice and reference values in grip strength: normal values. Try your result in the muscle age calculator.
Tratech HandGrip
HandGrip is a portable digital dynamometer with 0.1 kg precision and 320 Hz sampling: it shows maximal force, the force curve and RFD in real time, compares both hands and exports to Excel and CSV.
Frequently asked questions
Which is better, a hydraulic or a digital dynamometer?
It depends on use: the hydraulic one is the historical reference for comparing with classic tables; the digital one records the force curve and RFD and stores data, better for follow-up and research.
Are results from different dynamometers interchangeable?
No. A 2025 study found systematic differences between four dynamometers. To follow a person, always use the same device.
What is the advantage of measuring the force curve?
It shows time to peak and rate of force development (RFD), which declines earlier than maximal strength with age.
References
- Roberts HC et al. A review of the measurement of grip strength in clinical and epidemiological studies. Age and Ageing, 2011.
- García Sastre D et al. Dinamometría de mano: ¿importa el dispositivo? Endocrinología, Diabetes y Nutrición, 2025.

